WinBridge H5 User Manual

Published November 11th, 2021

Written by WinBridge Team

This article is about the modes of the H5 user manual, technical parameters, applications, safety warnings.

 WinBridge H5

WinBridge H5 Technical Parameters

Output Power: 30W Amplifying voice time: 5-8 hours(MIC mode)
Battery capacity: 2500mAh Charging time 3-5 hours
Charging Voltage DC 5V, 2A Product size: 240mm*226mm*97mm
Music playing time: 4-7 hours Unit weight: 1464g

Applications:

  1. Take out the amplifier, fasten the waist belt to metal hooks on both sides; Then tie it on the waist or hang on your shoulder, the belt is adjustable. You can also use the back splint to cinch the speaker on the waistband or trousers.
  2. Wear the headset microphone and adjust the position, stay 1 – 2cm away from the mouth. Insert the other end of the 3.5mm connector into the voice amplifier’s MIC port.

Safety Warnings:

  1. Please do not put the product and accessories nearby the fire or other hot environment.
  2. Wear the headset microphone and adjust the position, stay 1 – 2cm away from the mouth. Insert the other end of the 3.5mm connector into the voice amplifier’s MIC port.
  3. Please do not optionally open or tear down the battery accessories. It may cause explosion danger if the battery is replaced improperly. Avoid putting the battery into the water, fire, or near any hot environment.
  4. This product needs to use the power adapter (DC5V ) to charge. After charging, you should remember to unplug the power cord or power sock. We suggest stopping other operations under the charging mode. If you need to use it, please cut off the power supply firstly.
  5. Please turn off the product, if the wireless equipment is prohibited(it may lead to disturbances of electronic equipment or hidden danger).
  6. Please turn off the product in the flammable and combustible areas, at the same time adhere to the instructions to avoid explosion and fire hazards. The flammable and combustible areas include gas stations, flammable or chemical products.

Send a Message

Winbridge is a manufacturer specializing in the development and generation of voice amplifiers.Your email address will not be published. Required fields are marked *. We’ll respond within 24 hours.